The Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602 that you referenced fits most landing gear sets out there on fifth wheel campers so there's a really good chance this is what you'd need for your 2012 Fuzion Toy Hauler. This works on Lippert, Atwood, Stromberg Carlson, and Venture landing gear sets. If you have one of those brands of landing gear and this looks like what you have then this would be what you would need.
This is aluminum... view full answer...
The Dexter E-Z Flex kit # K71-656-00 works with axles that are up to 6,000 pounds, so as long as your axles have a capacity of 6,000 pounds or less, this would be a great option. From what I could find, the dry weight of a 2008 Keystone Fusion 362 is a little over 12,000 pounds so you should be good. view full answer...
I did some research and it looks like the ITC 69710-BK-6.5K part number you provided comes back to an 8" long exterior LED light.
While we don't have a direct replacement, I was able to find the Opti-Brite LED Strip Light for RVs # ILL78CBB which is only an inch longer than what you have right now, is compatible with 12V and 24V systems, and has an effective lumen output of 330 lumens, which is 150 lumens more than what your current light puts out. view full answer...
If you select keyed alike on the drop down menu on the product page for the Bauer Camper Door Lock part # BA54FR that you referenced all of the ones you order will use the same key which will be included. view full answer...
Dexter components like the Dexter E-Z Flex Equalizers # K71-655-00 you were looking at will work just fine on your Lippert axle, but you will want to make sure that the new equalizer has the same horizontal bolt hole distance as your current equalizers to keep your suspension geometry the same.
The # K71-655-00 is measures 7-3/4" from the center of the horizontal mounting holes, so if that matches your current equalizers this would be a great option.
Regarding the replacement shackle... view full answer...
We have brakes for you!
The 2017 Keystone Fuzion 325 Toy Hauler has a list of brakes compatible with it which I've linked below, but my recommendation is the Dexter Nev-R-Adjust Electric Trailer Brake Kit, part # 23-464-465.
This kit is a high-quality one that has both right-hand and left-hand assemblies. It's built for 7000-pound axles and has the Nev-R-Adjust feature that leads to better brake efficiency. They fit wheels 14.5 - 16 inches. The mounting flanges are a 5-bolt pattern and... view full answer...
It sounds like you are looking for new leaf spring hangers which we do offer replacements for. In order to get the correct ones you'll need to do some measuring. The measurement you're looking for is the distance from the top of the hanger to the center of the mounting hole. The Hanger for Double-Eye Springs part # 28-5 for example measures 3-1/4" tall. I have attached a full list of options below. view full answer...
For a 12 foot awning the part # LCV000334919-362241 would be exactly what you'd need and then to add an LED light kit you'd need the part # LC674282 as well and you'd be set. view full answer...
Yes the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote # LC675817 that you referenced will work great on your 40 ft Raptor toy hauler. It was made for campers just like yours so there would be no issue at all.
I attached an install and review video for this for you to check out as well. view full answer...
It's most likely one of a few options but I would have to know more info. Can you get the brand of the landing gear and the length of the outer tube of the jack? If brand is Lippert, LCI, Venture, Stromberg and measures 29-1/2 inches you'd want the part # LC179014. If instead its the other common size of 33-1/2 inch you'd want the part # LG-177201. view full answer...
We sell Kodiak hub and rotor kits like the part # KOD66FR which you could use to piece together a conversion kit for your 2016 Keystone Fuzion 345 which has 7k axles but we do not have kits that include all of the components needed from Kodiak.
The only other part number you'd need is the part # CAR-HBA16-2 which comes with the best actuator from Hydrastar and all of the brake lines and breakaway kit components needed. You'll need two of the part # KOD66FR. view full answer...
I'd recommend the Dexstar # AM20761B. The wheel is 16 x 6, has an 8 on 6-1/2 inch bolt pattern and a zero offset. The wheel doesn't carry a pressure rating, per se but it can handle the pressure of any tire that will fit on it, according to the fine folks at Dexstar.
The valve stem isn't included with the wheel. I'd recommend the # AM20906 metal valve stem that can handle 110 or 120 psi with no problem whatsoever. view full answer...
We have exactly what you are looking for.
I recommend the Air Lift QuickShot Compressor System for Air Springs - Support Line and Reserve Tank - Dual Path # AL25572 which will allow you to adjust the pressure in each of your air helper springs independently with the analog gauge, and with the included 2 gallon reserve tank you can air up tires if needed.
The 2 gallon tank will not be able to keep up with an impact gun, so I recommend using an electric impact. view full answer...
I do have an option for you but in order to tow a fifth wheel trailer using a truck with RamBox like a 2018 Ram 3500, you'll have to go with a pin box with rotating turret as that's the only way to clear the bed sides. Pin boxes with rotating turrets like the Reese Sidewinder cannot be used with gooseneck to fifth wheel adapters like the B&W Companion. Therefore, the only option would be a new fixed fifth wheel hitch. I recommend the Reese M5 5th Wheel Trailer Hitch part # RP30928 with... view full answer...
While the Provider ST235/85R16 Radial Trailer Tire - Load Range G # TTWPRG235R16 that you referenced might be smaller than what you have currently it would still fit and work great. You don't have to use metal valve stems with this tire but they aren't' a bad idea at all like with the part # AM20906. These also would easily hold 110 psi as well. view full answer...
In order to choose a disc brake kit for a trailer you'll need to know the axle capacity. The HydraStar Disc Brake Kit part # HSE7K-TR1 is what I recommend for a 7K axle capacity. It comes with everything needed to make the swap and the integrated hub and rotor design helps avoid compatibility issues with selecting the correct hubs.
If you have a different axle capacity please just let me know and I'd be glad to see if we have another kit. view full answer...
Yes, the Classic Accessories PermaPRO Deluxe Toy Hauler Cover # CA80-299-203101-RT will be a good fit for your 2022 Keystone Fuzion 419 at 44' 11" long. While this cover is listed for RVs up to 44', we have had several customer report to us that this cover will fit RVs up to about 45'. Most recently we had this cover successfully fit a 2015 Heartland Cyclone CY 4150 measured at 44.83" long. So it will be a tight fit for your Keystone Fuzion, but a fit nonetheless. view full answer...
Since I don't know what vent you have on your Keystone Fuzion the best cover solution we have would be the Fan-Tastic Ultra Breeze part # FVU1500WH which is white and a universal design that allows it to fit all standard RV roof vents. view full answer...
We have just the system you are look for.
I recommend the Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras - 7" Screen # FR98NR which has a camera for each side to replace a clearance light, and a camera for the rear of your 2008 Cyclone 3795 which also replaces a clearance light. This system requires wiring for power, but wirelessly communicates with the included 7" monitor allowing you to view all 4 cameras at once for security, or towing purposes.
If... view full answer...
Go To Results